500kw Resistive Load Bank

500kw Resistive Load Bank

A load bank is a simulating load test equipment used for generators, UPS, battery banks ect power systems load test.

Blue Diamond load banks are designed and built for continuous operations in the harshest outdoor environments, operating safely and reliably in ambient temperatures of 50 degrees and above.

Data Sheet
QuickStart Guide
Load Bank GA Drawing
Controller Wiring Diagram
Load Bank Wiring Diagram
Controller Manual

LOAD BANK SPECIFICATIONS

• Testing Load: 0-500 KW

• Model: Load Bank 500kW

• Serial number: GEN-LB500
• Rated Power: 500kW
• Operational Conditional
• Rated Current: 720 A
• Rated Voltage: 415 V
• Frequency: 50 Hz

CONSTRUCTION

• Galvanized Steel are Utilzed for superior heat deflection and corrosion protection
• Maintenance doors allows easy access to each separate panel for control, switchgear and power connections.
• Stainless Steel mesh screens of main air inlet and outlet t protect hazardous parts access.

PROTECTION

• Emergency stop gives full isolation of the fan and control supply.
• The fan motor is fully protected with breaker and a thermal overload.
• Over temperature detector are fitted to protect against overheating in the resistive duct, switchgear panel and panel.
• Cooling fan fault detector is used to monitor fan working status and air flow direction.
• Each step load and its associated contactor are protected by a mini breaker.

ELEMENTS

• Stainless steel tube resistor with wind cooling which are insulated with heavy-duty, high temperature ceramic insulators.

FUNCTIONS

• Fitted with Schneider PM5100 Display
• Manual switch easy control each load step and lamp indicator
• PLC Logic control
• Remote stop function is used to immediately shed load during the load test, the mains power loses and requires the generator capacity is available. 
• Audible and visual alarm of over temperature and cooling fan fault.
• Fault reset and lamp test.